Press LF/FF to eject the sheet, then turn off the printer.

To end the self test, make sure the printer is not printing.

To stop printing temporarily, press the PAUSE button.The printer begins printing the self test. The printer loads the sheet automatically. Slide a sheet of paper down firmly between the edge guides until it meets resistance.Next, adjust the right edge guide to match the width of your paper.

Slide the left edge guide until it locks in place at the guide mark.While holding down the LF/FF button, turn on the printer.Make sure the printer is turned off and the paper-release lever is pushed back to the single-sheet position.Printer's Self Test on the Dot Matrix Printer LX 300+. So if your printer can print out the form of letters and numbers that print out the results was good, it means that your printer is in good condition.Then turn it back on while pressing the FF (fast forward).Turn off the printer after a paper entry.This manual comes under the category Printers and has been rated by 1 people with an average of a. Net the lx 300 isnt listed (presumably because its not considered a receipt/retail printer). Checking the readme file for the Epson OPOS ADK for. Turn on the printer and insert the paper. View the manual for the Epson LQ-300+II here, for free. A quick Google for 'Epson LX 300' shows a printer that does not look like a receipt (or other retail) printer.Printer's Self Test on the Dot Matrix Printer LX 300. Objectives to test the printer without using a computer is needed to determine whether there is damage to the printer, such as can not do a print out or can find out the results print out the printer. Self test print done without using a computer as an intermediary device. Each printer is almost certain to have this facility. Printer's Self Test is one of the facilities contained in a printer.

Epson lx 300 ii handbuch